Skip to product information
1 of 2

BugBrand

Stereo Compress

Stereo Compress

Regular price $695.00 USD
Regular price Sale price $695.00 USD
Sale Sold out

by Bugbrand

Open Box Special - No Box. 

No Shipping to UK on Bugbrand, Order from bugbrand.co.uk please!

(German text below)

Text by Tom Bugs

The Stereo Compress (equal stress on the COM and the PRESS) further rounds out the line of red processors with a supreme quality stereo VCA compressor providing the proverbial sonic glue or adding a healthy dose of smash to your sounds. Happy gently coaxing the stereo bus or punching individual instruments into shape, the circuitry springs from a classic of British compression but entirely rebuilds the internals while combining several new twists, and is presented in a package that demands deep discovery within the realms of transient shaping. The Stereo Compress is best considered in two parts - see block diagrams:

Audio Section: The audio path is kept minimal with high quality components for low noise operation. The left and right channels are identical, each featuring Balanced Input Buffer, Compression VCA (2164 quad IC), Dry/Wet Blend VCAs (equal power crossfading for parallel compression) and Output Buffer. The unit can be used as a single mono compressor (use either left or right side) or ganged stereo, with the side-chain feeds being tapped post input buffer.

SideChain: The SideChain signal is taken initially as an equal sum of left & right inputs, but this sum can either be externally processed using Send/Return loop, or a different signal can be inserted. The Insert point is followed by Low and High Cut filters (12dB/Oct) allowing frequency dependent compression.
The SideChain processing is arranged around a Feedback VCA stage and contains rectification, ratio setting (2:1, 4:1, 10:1), fully variable Attack and Release time constants, and wide range Threshold and Make Up Gain controls. A Gain Reduction meter shows how hard the unit is being driven and features internal LED indication to show when the unit is Active (low red glow for bypass, brighter white glow for active.

Specifications
Inputs - Electronically balanced 1/4" TRS - input Impedance 20k
Outputs - Impedance balanced 1/4" TRS - output Impedance 100r
Sleeve selectable chassis or signal 0V via jumper (chassis as standard)

SideChain -
Tip - Return - 10k Input Imp
Ring - Send - 100r Output Imp
Sleeve - Signal 0V

Low Cut Filter - 12dB/Oct - 20Hz to 3kHz
High Cut Filter - 12dB/Oct - 250Hz to 20kHz

Attack - 0.05 to 50 m/Sec
Release - 50 ms to 1.2Sec

Ratio 2:1, 4:1, 10:1
Threshold +15dBU to -50dBU
Makeup Gain 0 to +30 dBU
Meter shows approx 0 to 14dB Reduction

Freq response - 20-20kHz within 0.5dB

Power - 12V DC 500mA supply, centre-positive, 2.1mm connector.
(worldwide 90-240VAC wall-wart provided with interchangeable mains plug adaptors)

The Stereo Compress is enclosed in a custom aluminium case (based on the Modular line) with PCB material front and side panels. Dimensions approx 5.25" x 7.5" x 3.5"

Two year parts warranty.

 

Der Stereo Compress (Betonung auf „Com“ und „press“ gleichermaßen) vervollständigt die Reihe roter Prozessoren mit einem Stereo VCA Kompressor höchster Qualität, der den Sound zusammenkleben oder ihm eine gesunde Dosis Smash verleihen kann. Ob er den Stereo Bus behutsam umschmeichelt oder den Klang einzelner Instrumente erst richtig zurechtstutzt, der Stereo Compress steht in der Tradition klassischer Britischer Kompression – allerdings mit einer völlig überarbeiteten internen Struktur und zahlreichen neuen Drehs auf dem Gebiet des Transient Shapings. Das Gerät ist in zwei Bereiche untergliedert:

Der Audiobereich: Um das Rauschen möglichst gering zu halten, wurde der schlicht gehaltene Audiopfad mit hochwertigen Komponenten ausgestattet. Linker und rechter Kanal sind identisch, beide verfügen über einen Balanced Input Buffer, Compression VCA (2164 quad IC), Dry/Wet Blend VCAs (Equal Power Crossfading für Parallelkompression) und einen Output Buffer. Das Gerät kann als Mono-Kompressor verwendet werden, indem entweder die linke oder die rechte Seite allein benutzt wird; oder im Stereo-Betrieb, wobei die Einspeisungen über Side-Chain nach dem Input Buffer abgegriffen werden.
Side-Chain: Das Side-Chain Signal wird zunächst als Summe des linken und rechten Eingangs genommen, kann dann aber entweder mittels Send/Return Loop extern verarbeitet werden, oder ein anderes Signal kann eingesetzt werden. Der Insert-Point ist gefolgt von Low und High Cut Filtern (12db/Okt), die frequenzabhängige Kompression ermöglichen. 

Die Side-Chain Signalverarbeitung ist um eine Feedback VCA-Stufe herum aufgebaut. Diese beinhaltet Rectification, Ratio Setting (2:1, 4:1, 10:1), voll variable Attack- und Release-Zeiten, sowie große Spielräume, den Threshold und Make-up Gain zu regulieren. Ein Gain Reduction Meter gibt Aufschluss darüber, wie stark der Kompressor zupackt, und via LED wird angezeigt, ob das Gerät aktiv ist (dunkleres rotes Glühen für Bypass, helleres weißes Glühen für aktiv). 

Spezifikationen 
Inputs - Electronically balanced 1/4" TRS - input Impedance 20k
Outputs - Impedance balanced 1/4" TRS - output Impedance 100r
Sleeve selectable chassis or signal 0V via jumper (chassis as standard)

Side-Chain
Tip - Return - 10k Input Imp
Ring - Send - 100r Output Imp
Sleeve - Signal 0V

Low Cut Filter - 12dB/Oct - 20Hz to 3kHz
High Cut Filter - 12dB/Oct - 250Hz to 20kHz

Attack - 0.05 to 50 m/Sec
Release - 50 ms to 1.2Sec

Ratio 2:1, 4:1, 10:1
Threshold +15dBU to -50dBU
Make-up Gain 0 to +30 dBU
Das Meter zeigt etwa 0 bis 14db Reduktion an 

Freq response - 20-20kHz within 0.5dB

Power - 12V DC 500mA supply, centre-positive, 2.1mm connector.
(internationale 90-240VAC Stromversorgung mit auswechselbaren Adaptern enthalten)


Custom Aluminium Gehäuse mit Front- und Seitenteilen aus PCB-Material. Maße etwa 13,3 cm x 19 cm x 8,9 cm

View full details